VT GROUTING HOSE
(VT = High Pressure)
Hoses are on one side terminated with a cup nut M12x1,5 and on the other side with outer thread M10x1. For connection of the grouting gun, we supply hoses terminated on both sides with cup nuts M12x1,5.
Technical data:
- Maximal working pressure: 400 bars (40 MPa)
- Failure pressure: 1600 bars (160 MPa)
- Standard lengths: 1,5 m; 2,0 m; 3,0 m; 5,0 m
TERMINATION M-ML Hoses are on one side terminated with a cup nut M12x1,5 and on other side with outer thread M10x1.
TERMINATION M-M Hoses are on both sides terminated with cup nut M12x1,5.
Products in this category
COUPLER 4-jaws
For the connection of the pump´s hose onto the grouting packer with ball-head nipple.
ALUMINIUM HOOK-ON-COUPLER 16 mm - angled
With rubber sealing.
HOOK-ON-COUPLER 16 mm - straight
For the connection of the pump´s hose onto the grouting packer with flat-head nipple.
FLAT-HEAD NIPPLE M32
For use with cement packers OPD (version Š - screw termination)
HOOK-ON-COUPLER 16 mm - angled
For the connection of the pump´s hose onto the grouting packer with flat-head nipple.
HOOK-ON-COUPLER M32 - DIRECT
For use with packer with flat-head nipple M32.
COUPLER
For lamellar injector 18 mm or plastic shaft locking with thread M10x1.
COUPLING SET IVC
For flat-head nipple M32.
QUICK COUPLER
For lamellar injector 18 mm.
ROTATING COUPLING
For hook-on-couplers.
FLEXI Hose 7/10
For cement groutings.
Our company
Advice and implementation
We provide our standing customers with advice and support in the field of low pressure and high pressure grouting.
More information